OVERNIGHT DELIVERY24/7 TECH SUPPORT2 YEAR WARRANTY

Search by part number. We have over $7,000,000 of parts, in stock.

- 0 Items
Extend the life of your PLC
Contact Us or Call 1-800-784-9385
The GE Fanuc 90-30 IC693BEM320 provides an interface between a Series 90-30 PLC and a proprietary Fanuc I/O LINK in a Fanuc CNC (Computer Numerical Control), or a Series 90-70 PLC. GE Fanuc 90-30 IC693BEM320 is configured as a slave device only and allows the Series 90-30 PLC to send either 32 or 64 I/O points to the I/O LINK. GE Fanuc 90-30 IC693BEM320 can be installed in any model of Series 90-30 PLC, and any number of I/O LINK Interface modules can be installed in a system within the current limits of the baseplate and other I/O modules installed in the baseplate. 
A GE Fanuc 90-30 IC693BEM321 is configured as a master module on a proprietary Fanuc I/O LINK. GE Fanuc 90-30 IC693BEM321 can receive 1024 discrete inputs from slaves, and send up to 1024 discrete outputs. The GE Fanuc 90-30 IC693BEM321 can be configured using the Logicmaster 90 (LM90) configuration software release 4.5 (or later), VersaPro software, Control software release 2.0 or later, or a Series 90-30 Hand-held Programmer (HHP).
The GE Fanuc 90-30 IC693BEM331 provides the interface between a Series 90-30 PLC and a Genius I/O serial bus. GE Fanuc 90-30 IC693BEM331 receives and transmits control data of up to 128 bytes for up to 31 devices on the Genius I/O bus. Up to eight GE Fanuc 90-30 IC693BEM331 modules can be included in a Series 90-30 PLC system that has release 5.0 or later Logicmaster 90-30 software, and release 5.0 or later CPU firmware.
GE Fanuc 90-30 IC693CMM301  provides global communications on a Genius Communications bus between Series 90-30 PLCs and/or other GE Fanuc PLCs. The Genius Communications bus GE Fanuc 90-30 IC693CMM301 is a token passing peer-to-peer, noise immune network optimized to provide high speed transfer of real time control data. Series 90-70, Series Six, and Series Five PLCs can communicate on this bus through their respective GE Fanuc 90-30 IC693CMM301 Genius Bus Controllers. 
The Enhanced Genius Communications Module GE Fanuc 90-30 IC693CMM302 is an intelligent module. GE Fanuc 90-30 IC693CMM302 provides automatic global data communications between a Series 90-30 PLC and up to 31 other devices on a Genius bus. Multiple GE Fanuc 90-30 IC693CMM302 modules can be installed in a Series 90-30 PLC system with each GCM+ having its own Genius bus serving up to 31 additional devices on the bus.
The Communications Coprocessor Module, GE Fanuc 90-30 IC693CMM311 provides a high performance coprocessor for all Series 90-30 modular CPUs. GE Fanuc 90-30 IC693CMM311 supports the GE Fanuc CCM communications protocol, the RTU (Modbus) slave  communications protocol, and the SNP protocol. GE Fanuc 90-30 IC693CMM311 can beconfigured using Logicmaster or VersaPro or by using a default setup.
The GE IC693CMM321 Ethernet Interface Module connects any GE Series 90-30 PLC to an Ethernet LAN.  The Ethernet interface on the IC693 CMM321 allows for either client or server communication capabilities.

Older CMM321 modules (version -EF and earlier) communicate via an external transceiver port on the bottom of the module and an AAUI cable.  The newer IC693CMM321 modules (version -EG and newer) have an RJ-11 Port right on the front of the module.  We can support either version of the module - please specify which type you prefer at the time of your order. 
The GE Fanuc 90-30 IC693PBM200 is a Master module for PROFIBUS DP networks. The GE Fanuc 90-30 IC693PBM200 can be mounted in any Series 90-30 baseplate (CPU, expansion, or remote) slot except slot 1 of a modular CPU baseplate. As well as supporting all standard data rates the GE Fanuc 90-30 IC693PBM200 also supports a maximum of 125 DP slaves and 244 bytes of input and 244 bytes of output for each slave.  
The GE Fanuc 90-30 IC693PBM201 is a Profibus DP Slave Module. GE Fanuc 90-30 IC693PBM201 has a network data rate of 12 Mbaud to 9600 baud. The network distance for the GE Fanuc 90-30 IC693PBM201 Profibus DP Slave Module is 12Mbaud @100 meters and 9600 baud @1200 meters.
This Personal Computer Interface card (PCIF) GE Fanuc 90-30 IC693PIF301 provides an alternative method of controlling Series 90-30 I/O. The GE Fanuc 90-30 IC693PIF301 card can be used inplace of a PLC CPU. The GE Fanuc 90-30 IC693PIF301 are implemented using computer language software (for example, C), or PC control software, such as Total Control Products’ FrameworX Automation Software.
This Personal Computer Interface card (PCIF2) GE Fanuc 90-30 IC693PIF400 provides an alternative method of controlling Series 90-30 I/O. The GE Fanuc 90-30 IC693PIF400 card can be used inplace of a PLC CPU. The GE Fanuc 90-30 IC693PIF400 are implemented using computer language software (for example, C), or PC control software, such as Total Control Products’ FrameworX Automation Software.