OVERNIGHT DELIVERY24/7 TECH SUPPORT2 YEAR WARRANTY
- 0 Items
Extend the life of your PLC
Contact Us or Call 1-800-784-9385
I/O bus expansion cables GE Fanuc 90-30 IC693CBL300 GE called “Wye cables,” are used to extend the I/O bus to expansion or remote baseplates in a Series 90-30 I/O system when additional I/O slots are needed or baseplates are required some distance from the CPU baseplate. The prewired I/O bus expansion cables Fanuc 90-30 IC693CBL300 can be used for connecting either expansion or remote baseplates. GE Fanuc 90-30 IC693CBL300 is a 3 feet (1 meter) that has continuous shield.
The Hand-Hand Programmer and Converter cable GE Fanuc 90-30 IC693CBL303 provides the connections that allow the Hand-Held Programmer and the Programmable Logic Controller to communicate. GE Fanuc 90-30 IC693CBL303 also provides power connections for the HHP  and a signal to the PLC that the HHP is attached to the PLC serial port. GE Fanuc 90-30 IC693CBL303 can also be used to connect the RS-485 serial port on the PLC to the RS-422/RS-485 to RS-232 converter.
The I/O Interface Cable GE Fanuc 90-30 IC693CBL311 assembly consists of a 24-pin I/O connector, a cable, and a 25-pin D-type terminal block connector.  GE Fanuc 90-30 IC693CBL311 is used to connect the Power Mate APM Modules (IC693APU301 and IC693APU302) to drives and machines. GE Fanuc 90-30 IC693CBL311 improves the Power Mate APM’s noise immunity.
The GE Fanuc 90-30 IC693CBL316 cable is a 3-feet (1 meter) long, shielded cable with a 9-pin D-shell connector one one end and a 6-pin RJ-11 connector on the other. This GE Fanuc 90-30 IC693CBL316 is also known as a “Station Manager Cable.” GE Fanuc 90-30 IC693CBL316 can interconnect RS-232 ports without the need for a converter.
GE Fanuc 90-30 IC693CBL324 is a 3’ (1 meter) cable. GE Fanuc 90-30 IC693CBL324 provides connections between a DSM module and either a servos axis terminal block or an aux axis terminal block. Refer to the DSM module user manual for further details on the GE Fanuc 90-30 IC693CBL324.
GE Fanuc 90-30 IC693CBL325 is a 10’ (3 meter) cable. GE Fanuc 90-30 IC693CBL325 connects between a DSM module and either a servo axis terminal block or an aux axis terminal block. Refer to the DSM module user manual for further details on the GE Fanuc 90-30 IC693CBL325.