- 0 Items
Extend the life of your PLC
Contact or Call 1-800-784-9385
The Bus Reviever module, GE Fanuc 90-70 IC697BEM711, has a high speed parallel bus expansion interface. Supporting up to seven expansion packs the,  GE Fanuc 90-70 IC697BEM711 has three LED indicators that provide module, termination, and bus expansion port status. With no DIP switches to set, the GE Fanuc 90-70 IC697BEM711 has easy software configuation into the PLC system. 
As a high preformance parallel programer interface the GE Fanuc 90-70 IC697BEM713 Bus Transmitter supports up to seven expansion racks. With the GE Fanuc 90-70 IC697BEM713 you will get three LED indicators providing module, programer port, and expansion port status. GE Fanuc 90-70 IC697BEM713 has easy software configuration into PLC systems due to the no DIP switches to set. 
GE Fanuc 90-70 IC697BEM721 is an I/O link interface module. The GE Fanuc 90-70 IC697BEM721 occupies single slot in PLC rack. GE Fanuc 90-70 IC697BEM721 has three status LEDs.
The GE Fanuc 90-70 IC697BEM731 Genius Bus Controller is a single channel controller of the Genius I/O LAN.  The IC660BEM731 supports up to thirty drops on the Genius LAN. Operation is augmented on the GE Fanuc 90-70 IC697BEM731 by an IC697 PLC alarm processor function. 
GE Fanuc 90-70 IC697BEM733 Genius Remote I/O Scanner can be located up to 7500 feet (2275 meters) from controller. GE Fanuc 90-70 IC697BEM733 supports standard IC697 discrete and analog I/O modules. GE Fanuc 90-70 IC697BEM733 handles up to 128 bytes of inputs and 128 bytes of outputs per remote drop.
The GE Fanuc 90-70 IC697BEM741 FIP Bus Controller allows the IC697 PLC to attach to a 1 Mbit FIP or WorldFIP Fieldbus network. The GE Fanuc 90-70 IC697BEM741 can scan FIP I/O from IC693 FIP Remote I/O Scanners, FIP IC670 modules, and generic FIP devices associated with the GE Fanuc 90-70 IC697BEM741.
The GE Fanuc 90-70 IC697BEM761 Series Six Interface module interfaces IC697 I/O modules to the I/O bus of an Series Six (IC600) programmable controller. GE Fanuc 90-70 IC697BEM761 provides an interface between the IC600 I/O bus and IC697 I/O modules. GE Fanuc 90-70 IC697BEM761 resides in an IC697 rack and has two 37-pin connectors identical to those used on the IC600 I/O Receiver for interconnection to the IC600 I/O bus.
IC697CMM711 Communications Coprocessor Module provides communications control (CCM), remote terminal unit (RTU), and general IC69* communications (SNP) functionality. CCM, RTU and SNP are available on either or both serial ports of the IC697CMM711 in any of nine possible configurations: CCM/CCM, CCM/RTU, RTU/CCM, RTU/RTU, SNP/SNP, SNP/CCM, CCM/SNP, SNP/RTU, and RTU/SNP. The IC697CMM711 provides both the RS-232 and RS-485 Interfaces and communicates with the PLC CPU over the backplane.
A GE Fanuc 90-70 IC697CMM721 is a Carrierband Lan Interface (MAP 3.0). The GE Fanuc 90-70 IC697CMM721 has direct PLC attachment to MAP Carrierband network. GE Fanuc 90-70 IC697CMM721 is a single-slot module composed of a factory-assembled digital controller and modem.
The GE Fanuc 90-70 IC697CMM741 MMS and TCP/IP Ethernet LAN Controller is a single-slot module that is inserted directly into the IC697 CPU rack. GE Fanuc 90-70 IC697CMM741 uses three LEDs for indicating the status of the interface. On the GE Fanuc 90-70 IC697CMM741 “Soft Switches” are used to tailor the Ethernet Controller to your application.
The GE Fanuc 90-70 IC697CMM742 Ethernet Module connects IC697 PLC to an IEEE 802.3 CSMA/CD 10Mbps Ethernet LAN via one of three network ports: 10BaseT, 10Base2, or AUI. 10BaseT and 10Base2 network ports on the GE Fanuc 90-70 IC697CMM742 provide direct connection to 10BaseT or 10Base2 network without an external transceiver. Firmware on the GE Fanuc 90-70 IC697CMM742e is pre-loaded for easy installation and is maintained indefinitely; firmware is easily upgraded in-system from PC attached to RS-485 serial port.
The Redundancy Communications Module GE Fanuc 90-70 IC697RCM711 provides a path for a sychronizing message from the active to the back up unit which is used to sychronize the two CPUs in a hot standby or enhanced hot standby CPU Redundancy System. GE Fanuc 90-70 IC697RCM711 also provides the path for the transfer of shared I/O data between the two units. GE Fanuc 90-70 IC697RCM711 is a Redundancy Communications Module.