OVERNIGHT DELIVERY24/7 TECH SUPPORT2 YEAR WARRANTY

Search by part number. We have over $7,000,000 of parts, in stock.

- 0 Items
Extend the life of your PLC
Contact Us or Call 1-800-784-9385

GE Intelligent Platforms - GE Fanuc Genius I/O

Series Prefix : IC660

We have a complete inventory of Genius I/O blocks from GE IP - GE Fanuc - discrete, analog, RTD, thermocouple, Power Monitoring, plus Hand-Held Monitors and Bus Controllers. Each remanufactured part comes with our exclusive 2-year warranty

Each circuit on each block has been tested for normal operation plus full diagnostic capabilities. Genius Bus Communications on each block has been tested for maximum distance from the Bus Controller.

Genius blocks were also sold under the following trade names: Taylor Mod 300, ABB - Advant OCS Sybron and Taylor Remote I/O (TRIO I/O).

We can also Repair any Genius I/O block- call our Repair Hotline today at 1-800-784-9385.

Sort by:

The GE IC660BBA020 is a 24 VAC/DC Voltage/Current 4 Input/2 Output Analog Block. The Genius IC660BBA020 has four independent input circuits and two independent output circuits. Each circuit on a GE IC660BBA020 4 Input/2 Output Analog Block can accept or provide signals in one of five analog ranges: 0-10 volts DC, -10 volts DC to +10 volts DC, -5 volts DC to +5 volts DC, 0-5 volts DC, or 4-20 mA/1-5 volts DC. 


The GE Genius IC660BBA021 24/28 VDC RTD Input Genius blocks monitor temperature inputs from Resistive Temperature Detectors (RTDs).  An IC660BBA021 RTD Input block has six input circuits, in three groups of two circuits each. Each input can be used with platinum, nickel, or copper RTDs. Input data for IC660BBA021 each circuit is linearized according to the type of RTD selected.

GE Genius IC660BBA023 24/48 VDC Thermocouple Input Blocks are primarily used for monitoring temperature, with standard thermocouple types (J, K, T, E, B, R, S, and N) connected, and the IC660BBA023 can also be used for measuring low-level voltage input signals. A GE IC660BBA023 Thermocouple block has six input circuits, in three isolated groups. +/-10 V common mode voltage (maximum) allowed between 2 points in a group. 


GE Genius IC660BBA024 24/48 VDC Current Source Analog I/O blocks are used to interface a GE PLC controller to devices that provide or accept 4mA to 20mA analog signals.  An IC660BBA024 Current Source Analog I/O block has four 4 to 20mA current inputs. Each input provides a 24 volt current loop power supply and is isolated from all other circuits within the block. The two output channels on the IC660BBA024 provide power and control of two 4-to-20mA current loops.

The GE Genius IC660BBA025 24/48 VDC current-source Analog Output Blocks have 6 output circuits for devices that accept 4 to 20mA signals. Outputs 5 and 6 on the IC660BBA025 can also be used for voltage applications.  Other features of the IC660BBA025 include advanced diagnostics and dedicated Bus Switching Module control.


Genius IC660BBA026 24/48 VDC Current Source Input Blocks are used to interface a controller to devices that provide 4mA to 20mA analog signals.  Each IC660BBA026 has six 4-to-20 mA input circuits, with isolated channels.  No user calibration is required for operation of the Genius IC660BBA106.


The GE Genius IC660BBA100 is a 115 VAC Voltage/Current 4 Input/2 Output Analog Block. The IC660BBA020 has four independent input circuits and two independent output circuits. Each circuit on a GE IC660BBA020 4 Input/2 Output Analog Block can accept or provide signals in one of five analog ranges: 0-10 volts DC, -10 volts DC to +10 volts DC, -5 volts DC to +5 volts DC, 0-5 volts DC, or 4-20 mA/1-5 volts DC. This flexibility allows these IC660 Genius blocks to be used with a wide variety of analog input and output devices.


The GE Genius IC660BBA101 115 VAC/125 VDC RTD Input Genius blocks monitor temperature inputs from Resistive Temperature Detectors (RTDs).  An IC660BBA101 RTD Input block has six input circuits, in three groups of two circuits each. Each input can be used with platinum, nickel, or copper RTDs. Input data for each circuit on the IC660BBA101 is linearized according to the type of RTD selected. 

GE Genius IC660BBA103 115 VAC/125 VDC Thermocouple Input Blocks are primarily used for monitoring temperature, with standard thermocouple types (J, K, T, E, B, R, S, and N) connected to the inputs. The IC660BBA103 can also be used for measuring low-level voltage input signals.  An IC660BBA103 Thermocouple block has six input circuits, in three isolated groups. Each group has two thermocouple input circuits and two remote cold junction compensation inputs. 


GE Genius IC660BBA104 115 VAC Current Source Analog I/O blocks are used to interface a GE PLC controller to devices that provide or accept 4mA to 20mA analog signals.  An IC660BBA104 Current Source Analog I/O block has four 4 to 20mA current inputs. Each input provides a 24 volt current loop power supply and is isolated from all other circuits within the block. The two output channels on the IC660BBA104 provide power and control of two 4-to-20mA current loops.


The GE Genius IC660BBA105 115 VAC Current-source Analog Output Blocks have six outputs to control 4 to 20 mA devices.  The IC660BBA105 Genius block provides power to all circuits – no separate power is required for 4-20 mA signals.  No calibration is required for operation of the IC660BBA105.


GE’s Genius IC660BBA106 115VAC/125VDC Current-source Analog Input Block provides 6 input circuits that receive inputs from devices that provide 4 – 20 mA analog signals.  Each input on an IC660BBA106 provides a 24 volt current loop power supply and is isolated from all other circuits within the IC660BBA106 Genius block.  


GE’s IC660BBD020 24/48 VDC Source Genius block, made for use with 3-wire solid state sensors and electromechanical sensors, provides 16 I/O points. Each circuit on the IC660BBD020 is easily configured to be an input, tri-state input, or output. No separate block power supply is needed to power the IC660BBD020.


GE’s Genius IC660BBD021 24/48 VDC Sink block provides 16 configurable and intelligent circuits for interface to field devices.  The IC660BBD021 DC 16-Circuit Sink I/O Blocks have 16 discrete circuits, each easily configured to be an input, tri-state input, or output.  No separate block power supply is needed to power the IC660BBD021.


The GE Genius IC660BBD022 24 VDC Source block is designed for use with 2-wire and 3-wire solid state sensors and electromechanical sensors. Each IC660BBD022 is a 16-circuit I/O Block that is an intelligent and configurable Genius Block.  Each circuit on the IC660BBD022 is easily configured to be an input, tristate input, or output.


The IC660BBD023 GE Genius 24 VDC Sink I/O block is an intelligent, configurable block that can interface to a wide range of discrete DC sensors and actuators.  Each IC660BBD023 receives current from field output devices. The IC660BBD023 has 16 configurable I/O circuits.


GE Genius IO IC660BBD024 is a DC 32-Circuit Source/Sink I/O Block is an intelligent, configurable module that interfaces the controller to devices that provide or accept a binary signal. GE Genius IO IC660BBD024 is compatible with a wide range of input devices, including both 2-wire and 3-wire electronic proximity switches. The GE Genius IO IC660BBD024 has thirty-two configurable I/O circuits, inputs and outputs can be mixed on block.
The GE Genius IO IC660BBD025 is a DC 32-Circuit Source/Sink I/O Block is an intelligent, configurable module that interfaces the controller to devices that provide or accept a binary signal. The GE Genius IO IC660BBD025 blocks are compatible with a wide range of input devices, including both 2-wire and 3-wire electronic proximity switches. With Thirty-two configurable I/O circuits, the GE Genius IO IC660BBD025 inputs and outputs can be mixed on block.
The 115VAC low-leakage I/O block GE Genius IO IC660BBD101E is an intelligent, configurable module that interfaces discrete sensors and actuators to a communications bus. Genius IO IC660BBD101 has selectable input filter time from 10ms to 100ms. Each circuit on the GE Genius IO IC660BBD101 has electronic fusing that shuts down the circuit in 5ms if output current exceeds 30 Amps with the output turned on, or 20 Amps after 2 cycles.
The 115VAC Discrete Input Block GE Genius IO IC660BBD110 is an intelligent, configurable module that provides an interface to 115VAC discrete input sensors. Typical inputs to the GE Genius IO IC660BBD110 are contact closures from switches, pushbuttons, or limit switches. GE Genius IO IC660BBD110 can be used with both 2-wire and 3-wire proximity switch inputs.
A High-speed Counter block the GE Genius IO IC660BBD120 provides direct processing of rapid pulse signals up to 200KHz for industrial control applications. There are 12 inputs and 4 outputs on the GE Genius IO IC660BBD120 plus a +5 volt DC output and an oscillator output. The high-speed counter on the GE Genius IO IC660BBD120 r can easily be configured to count either up or down, to count both up and down, or to count the difference between two changing values.
Relay Output blocks on the GE Genius IO IC660BBR100 provide 16 output circuits in four independent groups of four relay-type outputs each. The GE Genius IO IC660BBR100 relay blocks are compatible with a wide range of low-power control and indicating devices such as relays, contactors, and lamps. Each group of four outputs on a GE Genius IO IC660BBR100 can be powered by a separate AC or DC source.
The relay output blocks on the GE Genius IO IC660BBR101 provide 16 output circuits in four independent groups of four relay-type outputs each. The block power may be either 115V or 230V AC on the GE Genius IO IC660BBR101. The GE Genius IO IC660BBR101 relay blocks are compatible with a wide range of low-power control and indicating devices such as relays, contactors, and lamps.
GE Genius IC660BBS102 115 VAC/125 VDC Isolated Genius I/O blocks have four isolated groups of two I/O circuits, each rated to operate at a nominal 115 volts AC or 125 volts DC. GE Genius IC660BBS102 has selectable input filter time from 10ms to 100ms. Electronic fusing is built into each circuit used as an output in the GE Genius IC660BBS102.
GE Genius IC660BBS103 has four isolated groups of two I/O circuits, each rated to operate at a nominal 115 volts AC or 125 volts DC. Isolation in the GE Genius IC660BBS103 n is rated to withstand 250 VAC/VDC continuous between any group and ground or between any two groups. Transient rating GE Genius IC660BBS103 is 2000V peak for 10 sec.
The GE Genius IO IC660BCM501 is a hand-held monitor battery charger. The hand-held monitor GE Genius IO IC660BCM501 is a convenient operator interface device that can be used to setup and monitor a Genius I/O and communications system. A key feature of the GE Genius IO IC660BCM501 is its ability to communicate with I/O blocks and to force discrete and analog I/O regardless of if there is a PLC or a computer connected to the bus.
The GE Genius IO IC660BLM506 is a bus terminator 150 ohm (Qty 4). GE Genius IO IC660BLM506 has 4 connection points. For devices on either end of the bus, install the appropriate terminating resistor, GE Genius IO IC660BLM506.
The GE Genius IO IC660BLM507 is a block extraction tool. The GE Genius IO IC660BLM507 allows the replacement oc the block’s electronics assembly with a compatible model without removing field wiring or reconfiguring the block. Instructions to use the GE Genius IO IC660BLM507 should be read in full.
The GE Genius IO IC660BLM508 Bus Terminator 75 Ohm (Qty 4). GE Genius IO IC660BLM508 has 4 connection points. For devices on either end of the bus, install the appropriate terminating resistor, IC660BLM508
A Block PowerTRAC GE Genius IO IC660BPM100 has 115Vac/125Vdc power. The GE Genius IO IC660BPM100 calculates RMS voltage, current, active power, reactive power, KWH, and power factor. The GE Genius IO IC660BPM100 monitors current and voltage inputs and stores digitized waveform values for each input.
GE Genius IO IC660BPM500 requires a 16 hour charge. GE Genius IO IC660BPM500 is a battery pack for a hand-held monitor. GE Genius IO IC660BPM500 is fully discharged in 6 hours.
The GE Genius IO IC660BRD020 24/48vdc source block for redundancy "T" output configurations. A GE Genius IO IC660BRD020 has 16 discrete circuits, each easily configured to be an input, tristate input, or output. Output circuits on the GE Genius IO IC660BRD020 can be connected directly to input circuits without the use of other components or inversion of logic states.
The bus switching module 24/48vdc, GE Genius IO IC660BSM021, connects blocks to dual communications cables. One GE Genius IO IC660BSM021 can connect up to eight discrete and analog blocks to a dual bus. Using additional GE Genius IO IC660BSM021 permits up to 30 I/O blocks to interface to the same dual bus.
The GE Genius IO IC660BSM120 bus switching module 115Vac/125Vdc. One GE Genius IO IC660BSM120 can connect up to eight discrete and analog blocks to a dual bus. Using additional GE Genius IO IC660BSM120 permits up to 30 I/O blocks to interface to the same dual bus.
Electronic Assembly for GEFIC660BBA020
The GE Genius IO IC660EBA021 monitor temperature inputs from Resistive Temperature Detectors (RTDs). A GE Genius IO IC660EBA021 has six input circuits, in three groups of two circuits each. Group to group isolation in the GE Genius IO IC660EBA021 is 300 volts.
A GE Genius IO IC660EBA023 issued for monitoring temperature, with standard thermocouple types connected to the inputs. Also the GE Genius IO IC660EBA023 can also be used for measuring low-level voltage input signals. In the GE Genius IO IC660EBA023 there are six input circuits, in three isolated groups.
Current Source Analog I/O blocks the GE Genius IO IC660EBA024 is used to interface a controller to devices that provide or accept 4mA to 20mA analog signals. The GE Genius IO IC660EBA024 Six 4-to-20 mA analog circuits: 4 inputs and 2 outputs. Each input on the GE Genius IO IC660EBA024 provides a 24 volt current loop power supply and is isolated from all other circuits within the block.
GE Genius IO IC660EBA025 is a current-source analog output block that has 6 output circuits for devices that accept 4 to 20mA signals. GE Genius IO IC660EBA025 provides power to all circuits; no separate power is required for 4-20mA signals. The power on the GE Genius IO IC660EBA025 is isolated from the rest of the block.
The GE Genius IO IC660EBA026 used to interface a controller to devices that provide 4mA to 20mA analog signals. A Current Source Input block the GE Genius IO IC660EBA026 has six 4-to-20mA current inputs. Each input on the GE Genius IO IC660EBA026 provides a 24 volt current loop power supply and isisolated from all other circuits within the block.
The voltage/current 4 input/2 output analog block GE Genius IO IC660EBA100 have four independent input circuits and two independent output circuits. The GE Genius IO IC660EBA100 has independent scaling for each input and output. Each input in the GE Genius IO IC660EBA100 can operate in normal analog input mode, or report only its alarm status.
RTD input block GE Genius IO IC660EBA101 monitor temperature inputs from Resistive Temperature Detectors (RTDs). The GE Genius IO IC660EBA101 has six input circuits, in three groups of two circuits each. Each input on the GE Genius IO IC660EBA101 can be used with platinum, nickel, or copper RTDs.
A thermocouple Input Block the GE Genius IO IC660EBA103 is primarily used for monitoring temperature, with standard thermocouple types connected to the inputs. The GE Genius IO IC660EBA103 has six input circuits, in three isolated groups. The GE Genius IO IC660EBA103 provides cold junction compensation for all thermocouple input measurements.
Current Source Analog I/O block the GE Genius IO IC660EBA104 is used to interface a controller to devices that provide or accept 4mA to 20mA analog signals. GE Genius IO IC660EBA104 Six 4-to-20 mA analog circuits: 4 inputs and 2 outputs. No user calibration required for operation on the GE Genius IO IC660EBA104.
GE Genius IO IC660EBA105 is a current-source analog output block. The GE Genius IO IC660EBA105 has 6 output circuits for devices that accept 4 to 20mA signals. GE Genius IO IC660EBA105 is a Dedicated Bus Switching Module control.
The GE Genius IO IC660EBA106 are used to interface a controller to devices that provide 4mA to 20mA analog signals. A GE Genius IO IC660EBA106 Six has 4-to-20 mA input circuits. Each input on the GE Genius IO IC660EBA106 provides a 24 volt current loop power supply and is isolated from all other circuits within the block.
A GE Genius IO IC660EBD020 is a DC 16-Circuit Source/Sink I/O Block is an intelligent, configurable block that can interface to a wide range of discrete DC sensors and actuators. The GE Genius IO IC660EBD020 16 has discrete circuits, each easily configured to be an input, tristate input, or output. Output circuits on the GE Genius IO IC660EBD020 can be connected directly to input circuits without the use of other components or inversion of logic states.
GE Genius IO IC660EBD021 is a DC 16-Circuit Source/Sink I/O Blocks that has 16 discrete circuits, each easily configured to be an input, tristate input, or output. GE Genius IO IC660EBD021 has Output circuits that can be connected directly to input circuits without the use of other components or inversion of logic states. No separate block power supply is needed on the GE Genius IO IC660EBD021.
A DC 32-Circuit Source/Sink I/O Block the GE Genius IO IC660EBD024 is an intelligent, configurable module that interfaces the controller to devices that provide or accept a binary signal. The GE Genius IO IC660EBD024 are compatible with a wide range of input devices, including both 2-wire and 3-wire electronic proximity switches. Thirty-two configurable I/O circuits, inputs and outputs can be mixed on block with the GE Genius IO IC660EBD024.
GE Genius IO IC660EBD025 is an intelligent, configurable module that interfaces the controller to devices that provide or accept a binary signal. GE Genius IO IC660EBD025 is are compatible with a wide range of input devices, including both 2-wire and 3-wire electronic proximity switches. GE Genius IO IC660EBD025 has resettable self-protecting circuits.