OVERNIGHT DELIVERY24/7 TECH SUPPORT2 YEAR WARRANTY
- 0 Items
Extend the life of your PLC
Contact Us or Call 1-800-784-9385

GE/GE Fanuc Series 90-30

Series Prefix : IC693

Qualitrol International has thousands of new and remanufactured GE/GE Fanuc 90-30 PLC parts (IC693) in stock, including CPU350, CPU352, and the hard-to-find CPU364; power supplies; analog I/O modules, and more.

Our remanufactured parts are fully tested, cleaned, boxed and come with a 2-year warranty. Most parts can be shipped the same day. We also handle all Repairs in house.

For programming assistance, technical support, or configuration options, visit our Tech Support page.

If you are using the ALSPA C80-35 system from Alstom Power, the system is actually a GE/GE Fanuc 90-30. Any of the components listed here will work in your Alstom system - our sales representatives can help you select the correct part.

Sort by:
The GE Fanuc 90-30 GEFIC693ACC301 is a long-life Lithium battery that is used to maintain the contents of the CMOS RAM memory in the CPU is accessed by removing the cover plate located at the bottom of the power supply faceplate. This GE Fanuc 90-30 IC693ACC301  battery is mounted on a plastic clip attached to the inside of this cover. The GE Fanuc 90-30 IC693ACC301 connects to the CPU through a cable which has one end wired to the positive and negative sides of the battery and the other end wired to a connector that mates with one of two identical connectors mounted on the PLC.
The GE Fanuc 90-30 GEFIC693ACC302 is an auxillary battery module that provides extended memory backup tim compared to that of the stansdard memory backup batteries. This auxillary battery GE Fanuc 90-30 IC693ACC302 replaces the standard CPU RAM backup battery in control systems. The GE Fanuc 90-30 IC693ACC302 is for use in the 90-30 and 90-70 series. 
The 4-Channel Analog Voltage Input module for the Series GE Fanuc 90-30 GEFIC693ALG220 Programmable Logic Controller provides four input channels. The Analog Voltage Input module GE Fanuc 90-30 IC693ALG220 is capable of converting inputs in the range of –10 to +10 volts. The conversion speed for the GE Fanuc 90-30 IC693ALG220 in each channel is one millisecond and provides an update rate of four milliseconds for any channel. 
GE Fanuc 90-30 GEFIC693ALG221 is a 4-Channel Analog Current Input module which provides four input channels, each capable of  converting an analog input signal to a digital signal for use as required by your application. GE Fanuc 90-30 IC693ALG221 provides two input ranges, with the default range being 4 to 20 mA with user data scaled so that 4 mA corresponds to a count of 0 and 20 mA corresponds to a count of 32000 with each 1000 counts representing 0.5 mA. Conversion speed for each of the four channels on the GE Fanuc 90-30 IC693ALG221 is one-half millisecond which provides an update rate of two milliseconds for any channel. 
The GE Fanuc 90-30 GEFIC693ALG222 is a 16-Channel Analog Voltage Input module provides 16 single-ended or 8 differential input channels.  Each channel on the GE Fanuc 90-30 IC693ALG222 can be configured using the configuration software for either of two input ranges: 0 to 10 v (unipolar) and -10 to +10 (bipolar). The  GE Fanuc 90-30 IC693ALG222 can be installed in any I/O slot that has a serial connector.

A 16-Channel Analog Voltage Input module, the GE Fanuc 90-30 GEFIC693ALG223 provides up to 16 single-ended with each capable of converting an analog input signal to a digital value for use as required by your application. The default range on the GE Fanuc 90-30 IC693ALG223 is 4 to 20 mA with user data scaled so that 4 mA corresponds to a count of 0 and 20 mA corresponds to a count of 32000. The GE Fanuc 90-30 IC693ALG223  consumes 120 mA from the 5V bus on the PLC backplane and also requires 65 mA plus current loop current(s) from a user supplied +24V supply

The 2-Channel Analog Voltage Output module GE Fanuc 90-30 GEFIC693ALG390 provides two output channels, each capable of converting 13 bits of binary (digital) data to an analog output for use as required by your application. The Analog Voltage Output module GE Fanuc 90-30 IC693ALG390 is capable of providing outputs in the range of –10 to +10 volts. Both channels on the GE Fanuc 90-30 IC693ALG390 are updated on every scan which is about every 5 milliseconds.
The GE Fanuc 90-30 GEFIC693ALG391 is a 2-Channel Analog Current Output module provides two output channels, each capable of converting 12 bits of binary (digital) data to an analog output for use as required by your application. GE Fanuc 90-30 IC693ALG391 is capable of providing outputs in the range of 0 to 20 mA. The GE Fanuc 90-30 IC693ALG391 also has two output ranges each of which can be programed individually. 
The 8-Channel Analog Current/Voltage Output GE Fanuc 90-30 GEFIC693ALG392 provides up to eight single-ended output channels with current loop outputs or voltage outputs. Each analog output channel on the GE Fanuc 90-30 IC693ALG392 is capable of providing two current output ranges or two voltage output ranges. Each channel on the GE Fanuc 90-30 C693ALG392 can be individually configured for the output range required for your aplication. 
As an Analog Current/Voltage Combination Input/Output the GE Fanuc 90-30 GEFIC693ALG442 provides up to 4 differential input current or voltage channels and 2 single-ended output channels with either current loop outputs or voltage outputs. Each channel on the GE Fanuc 90-30 IC693ALG442 can be individually configured for the current or voltage range, as applicable, required for your application. All module configuration with the GE Fanuc 90-30 IC693ALG442 is done through software, except for a jumper required for selecting the current input mode.
High Speed Counter GE Fanuc 90-30 GEFIC693APU300 is a single-slot module which can be used in applications where pulse input rates exceed the input capability of the PLC or where too large a percentage of PLC processing capability would be required. The High Speed Counter GE Fanuc 90-30 IC693APU300 provides direct processing of rapid pulse signals up to 80 KHz for multiple industrial applications. The GE Fanuc 90-30 IC693APU300 is able to sense inputs, count, and respond with outputs without needing to communicate with a CPU.
The Motion Mate APM GE Fanuc 90-30 GEFIC693APU301 is an easy-to-use intelligent, fully programmable 1-axis motion control module. The GE Fanuc 90-30 IC693APU301 allows a PLC user to combine high-performance control with PLC logic solving functions in one integrated system. GE Fanuc 90-30 IC693APU301 can be configured to operate in either Standard mode or Follower mode.
The Motion Mate APM GE Fanuc 90-30 GEFIC693APU302 is an easy-to-use intelligent, fully programmable 2-axis motion control module. The GE Fanuc 90-30 IC693APU302 allows a PLC user to combine high-performance control with PLC logic solving functions in one integrated system. GE Fanuc 90-30 IC693APU302 can be configured to operate in either Standard mode or Follower mode.
An I/O Processo, the GE Fanuc 90-30 GEFIC693APU305, provides direct processing of rapid pulse signals for industrial control applications. GE Fanuc 90-30 IC693APU305 is able to sense inputs, process the input information, and control the outputs without needing to communicate with a CPU. GE Fanuc 90-30 IC693APU305 has up to 12 points of positive logic (source) inputs with a input voltage range selection of either 5 VDC (TTL) or 10 to 30 VDC (non-TTL).
The GE Fanuc 90-30 GEFIC693BEM320 provides an interface between a Series 90-30 PLC and a proprietary Fanuc I/O LINK in a Fanuc CNC (Computer Numerical Control), or a Series 90-70 PLC. GE Fanuc 90-30 IC693BEM320 is configured as a slave device only and allows the Series 90-30 PLC to send either 32 or 64 I/O points to the I/O LINK. GE Fanuc 90-30 IC693BEM320 can be installed in any model of Series 90-30 PLC, and any number of I/O LINK Interface modules can be installed in a system within the current limits of the baseplate and other I/O modules installed in the baseplate. 
A GE Fanuc 90-30 GEFIC693BEM321 is configured as a master module on a proprietary Fanuc I/O LINK. GE Fanuc 90-30 IC693BEM321 can receive 1024 discrete inputs from slaves, and send up to 1024 discrete outputs. The GE Fanuc 90-30 IC693BEM321 can be configured using the Logicmaster 90 (LM90) configuration software release 4.5 (or later), VersaPro software, Control software release 2.0 or later, or a Series 90-30 Hand-held Programmer (HHP).
The GE Fanuc 90-30 GEFIC693BEM331 provides the interface between a Series 90-30 PLC and a Genius I/O serial bus. GE Fanuc 90-30 IC693BEM331 receives and transmits control data of up to 128 bytes for up to 31 devices on the Genius I/O bus. Up to eight GE Fanuc 90-30 IC693BEM331 modules can be included in a Series 90-30 PLC system that has release 5.0 or later Logicmaster 90-30 software, and release 5.0 or later CPU firmware.
I/O bus expansion cables GE Fanuc 90-30 GEFIC693CBL300 GE called “Wye cables,” are used to extend the I/O bus to expansion or remote baseplates in a Series 90-30 I/O system when additional I/O slots are needed or baseplates are required some distance from the CPU baseplate. The prewired I/O bus expansion cables Fanuc 90-30 IC693CBL300 can be used for connecting either expansion or remote baseplates. GE Fanuc 90-30 IC693CBL300 is a 3 feet (1 meter) that has continuous shield.
The Hand-Hand Programmer and Converter cable GE Fanuc 90-30 GEFIC693CBL303 provides the connections that allow the Hand-Held Programmer and the Programmable Logic Controller to communicate. GE Fanuc 90-30 IC693CBL303 also provides power connections for the HHP  and a signal to the PLC that the HHP is attached to the PLC serial port. GE Fanuc 90-30 IC693CBL303 can also be used to connect the RS-485 serial port on the PLC to the RS-422/RS-485 to RS-232 converter.
The I/O Interface Cable GE Fanuc 90-30 GEFIC693CBL311 assembly consists of a 24-pin I/O connector, a cable, and a 25-pin D-type terminal block connector.  GE Fanuc 90-30 IC693CBL311 is used to connect the Power Mate APM Modules (IC693APU301 and IC693APU302) to drives and machines. GE Fanuc 90-30 IC693CBL311 improves the Power Mate APM’s noise immunity.
The GE Fanuc 90-30 GEFIC693CBL316 cable is a 3-feet (1 meter) long, shielded cable with a 9-pin D-shell connector one one end and a 6-pin RJ-11 connector on the other. This GE Fanuc 90-30 IC693CBL316 is also known as a “Station Manager Cable.” GE Fanuc 90-30 IC693CBL316 can interconnect RS-232 ports without the need for a converter.
GE Fanuc 90-30 GEFIC693CBL324 is a 3’ (1 meter) cable. GE Fanuc 90-30 IC693CBL324 provides connections between a DSM module and either a servos axis terminal block or an aux axis terminal block. Refer to the DSM module user manual for further details on the GE Fanuc 90-30 IC693CBL324.
GE Fanuc 90-30 GEFIC693CBL325 is a 10’ (3 meter) cable. GE Fanuc 90-30 IC693CBL325 connects between a DSM module and either a servo axis terminal block or an aux axis terminal block. Refer to the DSM module user manual for further details on the GE Fanuc 90-30 IC693CBL325.
A modular CPU baseplate GE Fanuc 90-30 GEFIC693CHS391 has 10 slots.  GE Fanuc 90-30 IC693CHS391 cannot stand alone and must be connected to a system that has a CPU. GE Fanuc 90-30 IC693CHS391 is modular and can be replaced or changed to a different type is additional features are required. 
GE Fanuc 90-30 GEFIC693CHS392 is a 10 slot expansion base plate.  Unable to stand alone the GE Fanuc 90-30 IC693CHS392 must be connected to a system that has a CPU. GE Fanuc 90-30 IC693CHS392 has a 25-pin female D-type I/O Bus Expansion connector mounted at its right end for connection to other baseplates. 
GE Fanuc 90-30 GEFIC693CHS393 is a remote base plate.  GE Fanuc 90-30 IC693CHS393 is unable to stand alone and must be connected to a system that already has a CPU. GE Fanuc 90-30 IC693CHS393 has 10 slots. 
The GE Fanuc 90-30 GEFIC693CHS397 is a 5 slot modular CPU base. GE Fanuc 90-30 IC693CHS397 is unable to stand alone and must be connected to a system with a CPU. Expanion and Remote baseplates are supported on the GE Fanuc 90-30 IC693CHS397. 
system with a CPU. GE Fanuc 90-30 GEFIC693CHS398 is a 5 slot Expansion baseplate. GE Fanuc 90-30 IC693CHS398 has a 25-pin female D-type I/O Bus Expansion connector mounted at its right end for connection to other baseplates.
GE Fanuc 90-30 GEFIC693CHS399 is a 5 slot remote base plate. GE Fanuc 90-30 IC693CHS399 cannot stand alone and must be connected to a system with a  CPU. GE Fanuc 90-30 IC693CHS399has a 25-pin female D-type I/O Bus Expansion connector mounted at its right end for connection to other baseplates.
GE Fanuc 90-30 GEFIC693CMM301  provides global communications on a Genius Communications bus between Series 90-30 PLCs and/or other GE Fanuc PLCs. The Genius Communications bus GE Fanuc 90-30 IC693CMM301 is a token passing peer-to-peer, noise immune network optimized to provide high speed transfer of real time control data. Series 90-70, Series Six, and Series Five PLCs can communicate on this bus through their respective GE Fanuc 90-30 IC693CMM301 Genius Bus Controllers. 
The Enhanced Genius Communications Module GE Fanuc 90-30 GEFIC693CMM302 is an intelligent module. GE Fanuc 90-30 IC693CMM302 provides automatic global data communications between a Series 90-30 PLC and up to 31 other devices on a Genius bus. Multiple GE Fanuc 90-30 IC693CMM302 modules can be installed in a Series 90-30 PLC system with each GCM+ having its own Genius bus serving up to 31 additional devices on the bus.
The Communications Coprocessor Module, GE Fanuc 90-30 GEFIC693CMM311 provides a high performance coprocessor for all Series 90-30 modular CPUs. GE Fanuc 90-30 IC693CMM311 supports the GE Fanuc CCM communications protocol, the RTU (Modbus) slave  communications protocol, and the SNP protocol. GE Fanuc 90-30 IC693CMM311 can beconfigured using Logicmaster or VersaPro or by using a default setup.
Ethernet Interface TCP/IP Module
In the GE Fanuc 90-30 GEFIC693CPU311 the CPU has user programabale memory of 6k(bytes) with 1k of register memory. GE Fanuc 90-30 IC693CPU311 is an embedded CPU that is part of an embedded CPU baseplate.  GE Fanuc 90-30 IC693CPU311 is not modular and cannot be changed. 
GE Fanuc 90-30 GEFIC693CPU313 has user programabale memory of 12k(bytes) with 2k of register memory. In the GE Fanuc 90-30 IC693CPU313 the CPU and memory integrated circuit chips are soldered to the backplane board of the baseplate. GE Fanuc 90-30 IC693CPU313 is not modular and cannot be changed. 
The GE Fanuc 90-30 GEFIC693CPU323 is not modular and cannot be changed. GE Fanuc 90-30 IC693CPU323 has user programabale memory of 12k(bytes) with 2k of register memory. In the GE Fanuc 90-30 IC693CPU323 the CPU and memory integrated circuit chips are soldered to the backplane board of the baseplate. 
The GE Fanuc 90-30 GEFIC693CPU331 is a single slot CPU that has user programabale memory of 16k(bytes) with 4k of register memory.  Has 1 built in port the GE Fanuc 90-30 IC693CPU331 that supports SNP/SNP-X master CCM, or RTU slave support and is a PCM module for RTU master support. GE Fanuc 90-30 IC693CPU331 has a processor speed of 10 megahertz.
The GE Fanuc 90-30 GEFIC693CPU340 is a single slot CPU that has user programabale memory of 32k(bytes) with 19.9k of register memory.  With 1 built in port the GE Fanuc 90-30 IC693CPU340 supports SNP/SNP-X master CCM, or RTU slave support; PCM module for RTU master support. GE Fanuc 90-30 IC693CPU340 has a processor speed of 20 megahertz.
The GE Fanuc 90-30 GEFIC693CPU341 is a single slot CPU that has user programabale memory of 32k(bytes) with 19.9k of register memory.  With 1 built in port the GE Fanuc 90-30 IC693CPU341 supports SNP/SNP-X master CCM, or RTU slave support; PCM module for RTU master support. With 80k bytes of user program memory the GE Fanuc 90-30 IC693CPU341 also has a processor speed of 20 megahertz.
With 1 built in port the GE Fanuc 90-30 GEFIC693CPU340 supports SNP/SNP-X master CCM, or RTU slave support and is a PCM module for RTU master support. The GE Fanuc 90-30 IC693CPU340 is a single slot CPU that has user programabale memory of 32k(bytes) with 19.9k of register memory.   GE Fanuc 90-30 IC693CPU340 has a processor speed of 25 megahertz and also hs 8 base plates per system. 
The GE Fanuc 90-30 GEFIC693CPU351 is a single slot CPU that has user programabale memory Depends on assigned values for configurable word memory (%R, %AQ, %AI) at a maximum of 240K Bytes and register memory configurable from 128 to 32,640 words, in 128 word increments.   With 1 built in port the GE Fanuc 90-30 IC693CPU351 supports SNP/SNP-X master CCM, or RTU slave support; PCM module for RTU master support. GE Fanuc 90-30 IC693CPU351 has a processor speed of 25 megahertz and also has 2 extra serial ports. 
The GE Fanuc 90-30 GEFIC693CPU352 is a single slot CPU  that has user programabale memory Depends on assigned values for configurable word memory (%R, %AQ, %AI) at a maximum of 240K Bytes and register memory configurable from 128 to 32,640 words, in 128 word increments.  With 3 built in port the GE Fanuc 90-30 IC693CPU352 supports SNP/SNP-X master CCM, or RTU slave support; PCM module for RTU master support. GE Fanuc 90-30 IC693CPU352 has a processor speed of 25 megahertz.
A GE Fanuc 90-30 GEFIC693CPU360 has a processor speed of 25 megahertz. The GE Fanuc 90-30 IC693CPU360 is a single slot CPU  that has user programabale memory Depends on assigned values for configurable word memory (%R, %AQ, %AI) at a maximum of 240K Bytes and register memory configurable from 128 to 32,640 words, in 128 word increments.  With 1 built in port the GE Fanuc 90-30 IC693CPU360 supports SNP/SNP-X master CCM, or RTU slave support; PCM module for RTU master support. 
The GE Fanuc 90-30 GEFIC693CPU363 is a single slot CPU that is a PCM module for RTU master support.  With 3 built in port the GE Fanuc 90-30 IC693CPU363 supports SNP/SNP-X master CCM, or RTU slave support. GE Fanuc 90-30 IC693CPU363 has a processor speed of 25 megahertz and that has user programabale memory Depends on assigned values for configurable word memory (%R, %AQ, %AI) at a maximum of 240K Bytes and register memory configurable from 128 to 32,640 words, in 128 word increments.
The GE Fanuc 90-30 GEFIC693CPU364 is a single slot CPU  that has user programabale memory Depends on assigned values for configurable word memory (%R, %AQ, %AI) at a maximum of 240K Bytes and register memory configurable from 128 to 32,640 words, in 128 word increments.  With 1 built in port the GE Fanuc 90-30 IC693CPU364 supports SNP/SNP-X master CCM, or RTU slave support; PCM module for RTU master support. GE Fanuc 90-30 IC693CPU364 has a processor speed of 25 megahertz.
CPU372 Plus Web Enabled Controller. Embedded 10/100MBS Ethernet with Built-In Switch. 120K Bytes Configurable User Memory.  

The GE Fanuc 90-30 GEFIC693CPU374/GEFIC693CPU374 Plus is a single slot CPU that has a processor speed of 133 MHz and has user memory of 240KB (Note: Actual size of available user program memory depends on the amounts configured for %R, %AI, and %AQ configurable word memory types.).   GE Fanuc 90-30 IC693CPU374/IC693CPU374 Plus supports RS-485 port on power supply. GE Fanuc 90-30 IC693CPU374/IC693CPU374 Plus has a processor speed of 133 megahertz.

The Motion Mate GE Fanuc 90-30 GEFIC693DSM302 is a high-performance, 2-axis motion control module. The GE Fanuc 90-30 IC693DSM302 is highly integrated with the logic solving and communications functions of the Series 90-30 PLC. Beginning with the release of Firmware 1.40, GE Fanuc 90-30 IC693DSM302 was provided with the capability of controlling servos with an analog command input, such as the GE Fanuc SL Series Servos, or third party analog servos. 
The Motion Mate GE Fanuc 90-30 GEFIC693DSM314 is a high-performance motion control module. GE Fanuc 90-30 IC693DSM314 is highly integrated with the logic solving and communications functions of the Series 90-30 PLC. In digital mode the GE Fanuc 90-30 IC693DSM314 controls GE Fanuc digital servos, while in analog mode it controls servos with an analog command input.
90-30 Documentation Library (paper manuals covering most options)