GE/GE Fanuc Series 90-30
Series Prefix : IC693
Qualitrol International has thousands of new and remanufactured GE/GE Fanuc 90-30 PLC parts (IC693) in stock, including CPU350, CPU352, and the hard-to-find CPU364; power supplies; analog I/O modules, and more.
Our remanufactured parts are fully tested, cleaned, boxed and come with a 2-year warranty. Most parts can be shipped the same day. We also handle all Repairs in house.
For programming assistance, technical support, or configuration options, visit our Tech Support page.
If you are using the ALSPA C80-35 system from Alstom Power, the system is actually a GE/GE Fanuc 90-30. Any of the components listed here will work in your Alstom system - our sales representatives can help you select the correct part.
|Part #:||Description:||More Info:|
|IC693ACC301||The GE Fanuc 90-30 GEFIC693ACC301 is a long-life Lithium battery that is used to maintain the contents of the CMOS RAM memory in the CPU is accessed by...|
|IC693ACC302||The GE Fanuc 90-30 GEFIC693ACC302 is an auxillary battery module that provides extended memory backup tim compared to that of the stansdard memory backup...|
|IC693ALG220||The 4-Channel Analog Voltage Input module for the Series GE Fanuc 90-30 GEFIC693ALG220 Programmable Logic Controller provides four input channels....|
GE Fanuc 90-30 GEFIC693ALG221 is a 4-Channel Analog Current Input module which provides four input channels, each capable of converting an analog...
|IC693ALG222||The GE Fanuc 90-30 GEFIC693ALG222 is a 16-Channel Analog Voltage Input module provides 16 single-ended or 8 differential input channels. Each...|
A 16-Channel Analog Voltage Input module, the GE Fanuc 90-30 GEFIC693ALG223 provides up to 16 single-ended with each capable of converting an...
|IC693ALG390||The 2-Channel Analog Voltage Output module GE Fanuc 90-30 GEFIC693ALG390 provides two output channels, each capable of converting 13 bits of binary...|
|IC693ALG391||The GE Fanuc 90-30 GEFIC693ALG391 is a 2-Channel Analog Current Output module provides two output channels, each capable of converting 12 bits of binary...|
The 8-Channel Analog Current/Voltage Output GE Fanuc 90-30 GEFIC693ALG392 provides up to eight single-ended output channels with current loop outputs or...
|IC693ALG442||As an Analog Current/Voltage Combination Input/Output the GE Fanuc 90-30 GEFIC693ALG442 provides up to 4 differential input current or voltage channels...|
|IC693APU300||High Speed Counter GE Fanuc 90-30 GEFIC693APU300 is a single-slot module which can be used in applications where pulse input rates exceed the input...|
|IC693APU301||The Motion Mate APM GE Fanuc 90-30 GEFIC693APU301 is an easy-to-use intelligent, fully programmable 1-axis motion control module. The GE Fanuc 90-30...|
|IC693APU302||The Motion Mate APM GE Fanuc 90-30 GEFIC693APU302 is an easy-to-use intelligent, fully programmable 2-axis motion control module. The GE Fanuc 90-30...|
|IC693APU305||An I/O Processo, the GE Fanuc 90-30 GEFIC693APU305, provides direct processing of rapid pulse signals for industrial control applications. GE Fanuc 90-30...|
The GE Fanuc 90-30 GEFIC693BEM320 provides an interface between a Series 90-30 PLC and a proprietary Fanuc I/O LINK in a Fanuc CNC (Computer Numerical...
|IC693BEM321||A GE Fanuc 90-30 GEFIC693BEM321 is configured as a master module on a proprietary Fanuc I/O LINK. GE Fanuc 90-30 IC693BEM321 can receive 1024 discrete...|
|IC693BEM331||The GE Fanuc 90-30 GEFIC693BEM331 provides the interface between a Series 90-30 PLC and a Genius I/O serial bus. GE Fanuc 90-30 IC693BEM331 receives and...|
I/O bus expansion cables GE Fanuc 90-30 GEFIC693CBL300 GE called “Wye cables,” are used to extend the I/O bus to expansion or remote baseplates in a...
The Hand-Hand Programmer and Converter cable GE Fanuc 90-30 GEFIC693CBL303 provides the connections that allow the Hand-Held Programmer and the...
|IC693CBL311||The I/O Interface Cable GE Fanuc 90-30 GEFIC693CBL311 assembly consists of a 24-pin I/O connector, a cable, and a 25-pin D-type terminal block connector....|
|IC693CBL316||The GE Fanuc 90-30 GEFIC693CBL316 cable is a 3-feet (1 meter) long, shielded cable with a 9-pin D-shell connector one one end and a 6-pin RJ-11 connector...|
GE Fanuc 90-30 GEFIC693CBL324 is a 3’ (1 meter) cable. GE Fanuc 90-30 IC693CBL324 provides connections between a DSM module and either a servos axis...
|IC693CBL325||GE Fanuc 90-30 GEFIC693CBL325 is a 10’ (3 meter) cable. GE Fanuc 90-30 IC693CBL325 connects between a DSM module and either a servo axis terminal block...|
|IC693CHS391||A modular CPU baseplate GE Fanuc 90-30 GEFIC693CHS391 has 10 slots. GE Fanuc 90-30 IC693CHS391 cannot stand alone and must be connected to a system...|
|IC693CHS392||GE Fanuc 90-30 GEFIC693CHS392 is a 10 slot expansion base plate. Unable to stand alone the GE Fanuc 90-30 IC693CHS392 must be connected to a system...|
|IC693CHS393||GE Fanuc 90-30 GEFIC693CHS393 is a remote base plate. GE Fanuc 90-30 IC693CHS393 is unable to stand alone and must be connected to a system that...|
|IC693CHS397||The GE Fanuc 90-30 GEFIC693CHS397 is a 5 slot modular CPU base. GE Fanuc 90-30 IC693CHS397 is unable to stand alone and must be connected to a system...|
system with a CPU. GE Fanuc 90-30 GEFIC693CHS398 is a 5 slot Expansion baseplate. GE Fanuc 90-30 IC693CHS398 has a 25-pin female D-type I/O Bus Expansion...
|IC693CHS399||GE Fanuc 90-30 GEFIC693CHS399 is a 5 slot remote base plate. GE Fanuc 90-30 IC693CHS399 cannot stand alone and must be connected to a system with a...|
|IC693CMM301||GE Fanuc 90-30 GEFIC693CMM301 provides global communications on a Genius Communications bus between Series 90-30 PLCs and/or other GE Fanuc PLCs....|
|IC693CMM302||The Enhanced Genius Communications Module GE Fanuc 90-30 GEFIC693CMM302 is an intelligent module. GE Fanuc 90-30 IC693CMM302 provides automatic global...|
|IC693CMM311||The Communications Coprocessor Module, GE Fanuc 90-30 GEFIC693CMM311 provides a high performance coprocessor for all Series 90-30 modular CPUs. GE Fanuc...|
|IC693CMM321||Ethernet Interface TCP/IP Module|
|IC693CPU311||In the GE Fanuc 90-30 GEFIC693CPU311 the CPU has user programabale memory of 6k(bytes) with 1k of register memory. GE Fanuc 90-30 IC693CPU311 is an...|
|IC693CPU313||GE Fanuc 90-30 GEFIC693CPU313 has user programabale memory of 12k(bytes) with 2k of register memory. In the GE Fanuc 90-30 IC693CPU313 the CPU and memory...|
|IC693CPU323||The GE Fanuc 90-30 GEFIC693CPU323 is not modular and cannot be changed. GE Fanuc 90-30 IC693CPU323 has user programabale memory of 12k(bytes) with 2k of...|
|IC693CPU331||The GE Fanuc 90-30 GEFIC693CPU331 is a single slot CPU that has user programabale memory of 16k(bytes) with 4k of register memory. Has 1 built in...|
|IC693CPU340||The GE Fanuc 90-30 GEFIC693CPU340 is a single slot CPU that has user programabale memory of 32k(bytes) with 19.9k of register memory. With 1 built...|
|IC693CPU341||The GE Fanuc 90-30 GEFIC693CPU341 is a single slot CPU that has user programabale memory of 32k(bytes) with 19.9k of register memory. With 1 built in...|
|IC693CPU350||With 1 built in port the GE Fanuc 90-30 GEFIC693CPU340 supports SNP/SNP-X master CCM, or RTU slave support and is a PCM module for RTU master support....|
|IC693CPU351||The GE Fanuc 90-30 GEFIC693CPU351 is a single slot CPU that has user programabale memory Depends on assigned values for configurable word memory (%R,...|
|IC693CPU352||The GE Fanuc 90-30 GEFIC693CPU352 is a single slot CPU that has user programabale memory Depends on assigned values for configurable word memory...|
|IC693CPU360||A GE Fanuc 90-30 GEFIC693CPU360 has a processor speed of 25 megahertz. The GE Fanuc 90-30 IC693CPU360 is a single slot CPU that has user...|
|IC693CPU363||The GE Fanuc 90-30 GEFIC693CPU363 is a single slot CPU that is a PCM module for RTU master support. With 3 built in port the GE Fanuc 90-30...|
|IC693CPU364||The GE Fanuc 90-30 GEFIC693CPU364 is a single slot CPU that has user programabale memory Depends on assigned values for configurable word memory...|
|IC693CPU372||CPU372 Plus Web Enabled Controller. Embedded 10/100MBS Ethernet with Built-In Switch. 120K Bytes Configurable User Memory.|
The GE Fanuc 90-30 GEFIC693CPU374/GEFIC693CPU374 Plus is a single slot CPU that has a processor speed of 133 MHz and has user memory of 240KB...
|IC693DSM302||The Motion Mate GE Fanuc 90-30 GEFIC693DSM302 is a high-performance, 2-axis motion control module. The GE Fanuc 90-30 IC693DSM302 is highly integrated...|
The Motion Mate GE Fanuc 90-30 GEFIC693DSM314 is a high-performance motion control module. GE Fanuc 90-30 IC693DSM314 is highly integrated with the logic...
|IC693LBR301||90-30 Documentation Library (paper manuals covering most options)|