Remanufactured GE-Emerson IC693MDL730 12 to 24VDC Positive Logic 2 Amp Output Module

Provides 8 output points in one group with a common power input terminal.

Remanufactured

$634.03
$570.63
Availability
  • 9 in stock
  • Additional 22 ready to ship within 2-3 days

Repair

Call for pricing
Availability
  • Usually ships in 3-5 business days

For on-site repair and support, call us at 1-704-448-2212 or email sales@qualitrol.com.

Part Number
  • IC693MDL730RMN
Manufactured
Product Specs

Features

  • 12/24VDC rated voltage
  • 12 to 24VDC output voltage range (+20%, -15%)
  • 1,500V isolation between field side and logic side
  • Output current:
    • 2 Amps max. per point
    • 2 Amps max. per fuse at 140°F
    • 4 Amps max. per fuse at 122°F
  • Output characteristics:
    • 9.4 Amps inrush current for 10ms
    • 1.2V max. output voltage drop
    • 1mA max. off-state leakage
    • 2ms max. On and Off response time
  • 55mA power consumption from 5V bus on backplane (all outputs on)

The GE-Emerson IC693MDL730 12 to 24VDC Positive Logic 2 Amp Output Module sources current to the loads from the user common or positive power bus. The output device is connected between the negative power bus and the module output. The output characteristics are compatible with a wide range of user-supplied load devices, such as motor starters, solenoids, and indicators. Power to operate the field devices must come from an external power supply supplied by the user.

LED indicators that provide the ON/OFF status of each point are located at the top of the module. This LED block has two horizontal rows with eight green LEDs in each row. This module uses the top row labeled A1 through 8 (points 1 through 8). A red LED (labeled “F”) on the right and centered between the two rows of green LEDs functions as a blown fuse indicator; it turns ON when any fuse is blown. The module has two 5 Amp fuses with each fuse protecting four outputs; the first fuse protects A1 - A4, and the second fuse protects A5 - A8. The fuses are electrically connected to the same common.  An insert goes between the inside and outside surfaces of the hinged door. The surface towards the inside of the module (when the hinged door is closed) has circuit wiring information, and circuit identification information can be recorded on the outside surface. The outside left edge of the insert is color-coded blue to indicate a low-voltage module.

This module can be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system.