GE-Emerson IC697MDL940 Series 90-70 Discrete Relay Output Module

16 points - 8 isolated Form C, 2 groups of 4 Form A.

New Surplus

$1,650.00
Availability
  • 1 in stock

Remanufactured

$1,650.00
$1,485.00
Availability
  • 1 in stock
  • Additional 1 ready to ship within 2-3 days

Repair

Call for pricing
Availability
  • Usually ships in 3-5 business days

For on-site repair and support, call us at 1-704-448-2212 or email sales@qualitrol.com.

Part Number
  • IC697MDL940
Manufactured
Product Specs

Features

  • 2 Amps per point switching capacity
  • RC snubber and fuse protection per point
  • No user power required
  • Removable field wiring terminal

The GE-Emerson IC697MDL940 Series 90-70 Discrete Relay Output Module will switch a variety of low to medium power loads such as relays, contactors, and lamps.

The resistive rating of the module is 2 Amps per point at 120/240 VAC or 24 VDC and 0.2 Amps per point for 125 VDC. Power to energize the relay coils is supplied by the module and each output is individually fused and suppressed with an RC snubber.

LED indicators that display the ON - OFF status of each point on the logic (PLC) side of the circuit are located at the top of the module.

Field wiring is made to a removable terminal board and the module is mechanically keyed to ensure correct replacement with a similar module type in the field. I/O references are user configurable without the use of jumpers or DIP switches on the module.

Configuration is done using the configuration function of the MS-DOS or Windows programming software running on Windows 95 or Windows NT over Ethernet TCP/IP or through the SNP port. The Programming Software configuration function is installed on the programming device. The programming device can be an IBM XT, AT, PS/2, or compatible PC.