Repair GE-Emerson IC693MDL231 240 Volt AC Isolated Input Module

Provides 8 isolated input points, each with a common power input terminal.

Repair

Call for pricing
Availability
  • Usually ships in 3-5 business days

Remanufactured

$760.57
$684.51
Availability
  • 3 in stock

For on-site repair and support, call us at 1-704-448-2212 or email sales@qualitrol.com.

Part Number
  • IC693MDL231REP
Manufactured
Product Specs

Features

  • 240VAC, 50/60Hz rated voltage
  • 0 to 264VAC, 50/60Hz input voltage range
  • Isolation:
    • 1,500V RMS between field side and logic side
    • 500V RMS between inputs
  • 15mA (typical) input current at rated voltage
  • Input characteristics:
    • 148 to 264VAC on-state voltage
    • 0 to 40VAC off-state voltage
    • 6mA minimum on-state current
    • 2.2mA maximum off-state current
    • 30ms max. On response time
    • 45ms max. Off response time
  • 60mA power consumption (all inputs on) from 5V bus on backplane

The GE-Emerson IC693MDL231 240 Volt AC Isolated Input Module includes reactive (resistor/capacitor) input circuits. Current into an input point results in a logic 1 in the input status table (%I). Input characteristics are compatible with a wide range of user-supplied input devices, such as pushbuttons, limit switches, and electronic proximity switches. Power to operate the field devices must be supplied by the user. This module requires an AC power source; it cannot be used with a DC power source.

LED indicators that provide the ON/OFF status of each point are located at the top of the module. This LED block has a horizontal row with eight green LEDs labeled A1 through 8 (points 1 through 8). An insert goes between the inside and outside surface of the hinged door. The surface towards the inside of the module (when the hinged door is closed) has circuit wiring information, and circuit identification information can be recorded on the outside surface. The outside left edge of the insert is color-coded red to indicate a high-voltage module.

This module can be installed in any I/O slot of a 5- or 10-slot baseplate in a Series 90-30 PLC system.