GE-Emerson IC660BBS100 Genius 8-Circuit Isolated I/O Block

Name: GE-Emerson IC660BBS100 Genius 8-Circuit Isolated I/O Block
Brand: GE-Emerson
Price: 1128.0 USD
Availability: InStock

(GE-Fanuc) Provides four isolated groups of two I/O circuits, each rated to operate at a nominal 115VAC or 125VDC.

Remanufactured

$1,128.00

20 in stock
Additional 11 ready to ship within 2-3 days

What is remanufactured?

Repair

$902.40

Call for availability

What is repair?

Manufactured

By GE-Emerson

Qualitrol Offers

18 Month In-Service Warranty
FREE Evaluations on Repairs
Complete System Testing
Rush service available!
The #1 GE-Authorized PLC Support Center

Product Specs

Features

Unit OK, I/O Enabled LEDs (I/O Block)
LEDs (each circuit): On logic side of switch
1,500V block to block isolation
Heat dissipation:
- 16.8W max. with 8 inputs on
- 45.6W max. with 8 outputs at 2 Amps
8W max. required control power (block only)
Operating voltage (one source):
- AC: 93 to 132VAC
- DC: 105 to 132VDC
Frequency:
- AC: 47 to 63Hz
- DC: 10% max. ripple
Power supply dropout time:
- AC: 1 cycle
- DC: 10ms
Output Pulse Test capability
Selectable Input Filter Time from 10 to 100ms
Output powerup defaults
Output Hold Last State or default
CPU Redundancy type
Bus Switching Module control

The GE-Emerson (GE-Fanuc) IC660BBS100 Genius 8-Circuit Isolated I/O Block reports a Failed Switch diagnostic if any output's commanded state is not the same as the actual state of the block's own internal switch.

Isolation is rated to withstand 250 VAC/VDC continuous between any group and ground or between any two groups. Transient rating is 2000V peak for 10 sec.

Control power for the block is tapped off the input/output device voltages wired to the terminals. The block has terminals for a separate power source for the internal electronics. The block power supply can be independently either AC or DC. The block need not be powered in the same manner as the circuits.