GE-Emerson IC670MDL740 Field Control Discrete Output Module

Name: GE-Emerson IC670MDL740 Field Control Discrete Output Module
Brand: GE-Emerson
Price: 299.0 USD
Availability: InStock

(GE-Fanuc) Provides a single group of 16 discrete positive logic or sourcing-type outputs.

Remanufactured

$299.00

1 in stock
Additional 1 ready to ship within 2-3 days

What is remanufactured?

New Surplus

$589.00

3 in stock

What is new surplus?

Repair

$239.20

Call for availability

What is repair?

Manufactured

By GE-Emerson

Qualitrol Offers

18 Month In-Service Warranty
FREE Evaluations on Repairs
Complete System Testing
Rush service available!
The #1 GE-Authorized PLC Support Center

Product Specs

Features

10 to 30VDC user input voltage, 24VDC nominal, 4A max.
9.2 to 29.5VDC output voltage range
Output current:
- 0.5 Amps max. per point
- 4 Amps max. per module
Isolation (user input to logic, user input to frame ground, group to group):
- 250VAC continuous, 1500VAC for 1min
- No isolation between individual points in a group
111mA max. current drawn from BIU power supply
2A max. inrush current for 100mS
0.5 Amps max. load current (resistive) from 10 to 30VDC
1mA min. load current per point
0.5V max. output voltage drop
0.5mA at 30VDC output leakage current
200μs max. on/off response time with 0.5A resistive load

The GE-Emerson (GE-Fanuc) IC670MDL740 Field Control Discrete Output Module includes outputs that switch loads to the positive side of the DC supply, supplying current to the load. The module is powered by the bus interface unit (BIU) power supply. An external source of DC power must be provided for the switches that power the loads. Within the module, the external power supply is connected to a 5A fuse. During operation, the module monitors this power to be sure it is above 9.8VDC. If not, it is interpreted as a fault by the BIU.

Individual LEDs (logic side), visible through the transparent portion of the module top, indicate the on/off status of each output. The PWR LED is on when field and backplane power are present and the module fuse is not blown.

Intelligent processing for the module is performed by the BIU or elsewhere in the system. This includes configuring features such as output default and fault reporting. The module has 8 bits (one byte) of discrete output data. A BIU is required to obtain this output data from the host and/or local processor.